Gouri Needles in Riyadh
Read in Arabic
Medical Reviewer | Dr. Asmaa Abdel Raouf
SCFHS-licensed Dermatologist and Cosmetologist | Reviewed: 16 September 2026
Are fine lines, mild sagging, or dull skin making your face look less firm? Gouri needles in Riyadh offer a gradual approach to these common skin changes without adding heavy facial volume. The treatment uses liquid PCL to stimulate fibroblasts and support new collagen production. At Enfield Royal Clinic, our dermatologists first assess your skin and select suitable injection areas before administering Gouri. This careful approach helps match the treatment with your skin concerns.
The sections below explain Gouri, its benefits, treatment areas, and expected results.
Procedure Type
Collagen-boosting injectable
Session time
Around 20-30 minutes
Cost
Starts From 1199 SAR
Results Longetivity
About 6-12 months
Table of Contents
What are Gouri Needles?
Gouri needles are a collagen-boosting injectable treatment made with 21% polycaprolactone (PCL). Gouri is a liquid PCL injectable developed by Dexlevo in South Korea. It uses Dexlevo’s patented CESABP technology to dissolve PCL into a fully liquid form. Unlike particle-based PCL products, Gouri contains no solid microparticles. After injection, the solution distributes through the skin and stimulates fibroblasts to produce new collagen. This supports firmer skin, better elasticity, smoother texture, and overall skin quality.
Which Concerns do Gouri Needles Address?
Along with collagen support, Gouri needles can address the following concerns:
- Fine lines and wrinkles
- Skin laxity and mild sagging
- Loss of elasticity and firmness
- Dull or tired-looking skin
- Early loss of facial definition
- Mild softening around the cheeks and jawline
- Uneven skin tone and pigmentation
- Enlarged pores and visible skin imperfections
Gouri vs Profhilo
Factor | Gouri | |
Active ingredient | 21% polycaprolactone (PCL) in a fully liquid form | Hybrid hyaluronic acid (HA) with high and low molecular weights, 64 mg per 2 mL |
How it works | PCL helps stimulate the skin to produce more collagen. | Helps hydrate the deeper skin layers and supports collagen and elastin production |
Texture and formula | A smooth and even liquid with no particles | A non-cross-linked HA gel with a very light and fluid texture |
Typical sessions | 1 main session, followed by 1-2 sessions at 4-6 weeks if needed | Usually 2 sessions, 4 weeks apart, with a third session sometimes used |
When results appear | Early changes can appear within 1-2 weeks, with clearer results around 4-8 weeks | Hydration can appear early, while firmer skin usually shows around 8-12 weeks |
How long results last | About 6-12 months as the PCL gradually breaks down | About 6-9 months after the second session |
Can it be reversed? | It cannot be dissolved with hyaluronidase. | HA can be dissolved with hyaluronidase when needed |
Best suited for | Overall collagen support, subtle lifting, and smoother skin texture | Skin laxity and dehydration, with added glow and firmness without extra volume |
Elevate Your Beauty With our Expert Dermatologists | Schedule a Gauri Needles Consultation Now!
Where can Gouri be Injected?
Gouri needles can be injected safely in the following areas:
- Cheeks
- Forehead
- Chin and jawline
- Areas around the mouth
- Area around the eyes
Are Gouri Needles Safe?
Yes, Gouri needles are generally safe when a qualified medical professional performs the treatment correctly. However, some people notice mild redness, swelling, tenderness, or bruising at the injection sites. These reactions often settle within 1 to 3 days. Available studies describe Gouri as well tolerated with a favorable safety profile.
Features of Gouri needles
Gouri needles have several features that relate to their formulation and how they work within the skin. The main features are listed below:
- Fully liquid PCL formula
Gouri contains a fully liquid form of polycaprolactone (PCL). It has no solid PCL microparticles or granules.
- Even tissue distribution
The liquid formula spreads through the treated tissue after injection. This allows broader facial coverage from fewer injection points.
- Full-face collagen stimulation
PCL stimulates fibroblasts across the treated facial areas. These cells produce new collagen that supports the skin structure.
- Gradual skin changes
New collagen forms over the weeks after treatment. This allows changes in firmness and skin quality to develop gradually.
- Biodegradable material
PCL is a biodegradable polymer that breaks down through hydrolysis. The body gradually removes the polymer after its role in collagen stimulation.
Benefits
The benefits of Gouri needles include several changes that support better skin quality. Some of them are as follows:
- Encourages new collagen formation
The Gouri needles stimulate fibroblasts. This produces new collagen and strengthens the skin’s supporting structure.
- Improves elasticity and firmness
As fibroblasts produce collagen, the skin gains better structural support and elasticity.
- Reduces visible wrinkles
New collagen adds support beneath the skin. This softens the fine lines and wrinkles.
- Improves uneven texture
Collagen production helps strengthen the skin structure. This, in turn, creates a smoother surface.
- Supports gradual skin improvement
Fibroblast activity continues after treatment, allowing new collagen to form gradually within the skin.
Who Can Have Gouri Needles?
Individuals who can have Gouri needles often have specific skin concerns. Suitable candidates include the following:
- People with early wrinkles, fine lines, or mild skin laxity.
- Individuals seeking better collagen levels and firmer-looking skin.
- Those with dull, dry, or dehydrated-looking facial skin.
- People who have fine lines around the eyes or mouth.
- People seeking gradual skin improvement without added facial volume.
- Individuals wanting smoother texture and a more radiant complexion.
- Those concerned about visible pores or uneven skin texture.
- People seeking an alternative to traditional dermal fillers.
What Should You do Before Getting a Gouri Injection?
You should take a few simple steps before getting a Gouri injection. These are as follows:
- Avoid aspirin, NSAIDs, and other blood-thinning medicines only with your doctor’s advice.
- Stay out of direct sunlight for longer periods before getting Gouri needles.
- Keep your skin hydrated by drinking enough water.
- Get enough rest before coming for the treatment.
- Avoid smoking during the week before treatment.
What Happens When You Get a Gouri Injection Session?
When you get Gouri needles, your session follows a clear treatment process. Here is what exactly happens at each step:
Consultation and Planning
The specialist first evaluates your skin and listens to your concerns. Then, they decide which areas require dosage and calculate the suitable dosage. |
Face Cleansing
Your face is gently washed with warm water before the treatment. This removes surface impurities and prepares the skin for needles. |
Numbing Cream Application
Numbing cream is applied over the selected injection areas. It remains there for approximately 20 to 30 minutes. The cream is then ready to be removed. |
Anesthetic Removal
The numbing cream is carefully removed after the recommended time. The doctor then prepares the selected areas for needles. |
Gouri Injection Administration
At this stage, gouri is injected into the selected areas according to your treatment plan. The doctor also adjusts the approach based on the area being treated. This session generally lasts around 20-30 minutes. |
Aftercare Guidance
After the procedure, your specialist explains the recommended aftercare. They also inform you when to return for follow-up. This helps monitor your skin after treatment. |
How Can you Protect Your Skin After Gouri Needles?
After Gouri needles, you can protect your skin by following these practical tips:
- Leave the injection areas untouched and avoid facial massage.
- Don’t apply creams directly onto fresh needle marks initially.
- Stay away from alcohol and smoking for 24 hours.
- Use SPF 50+ sunscreen when going outdoors after treatment.
- Skip swimming and intense physical activity for 1 week
- Avoid excessive heat while swelling or warmth remains present
How do Results Develop After Gouri Injection?
Timeframe | What you can expect |
Day 1-3 | Mild redness, swelling, or small bumps can appear around injection sites |
Weeks 1-2 | Early changes in skin firmness and glow begin to appear |
Weeks 2-4 | Skin texture and firmness become more noticeable during this period |
Weeks 4-8 | Improvements in elasticity, fine lines, and overall skin quality become more obvious |
Month 3 | Collagen remodeling reaches a stronger visible change and improves firmness and skin quality |
Months 6-12 | Results gradually fade as PCL breaks down. Maintenance sessions are often considered during this period |
Gouri Needles Cost in Riyadh
The price of Gouri needles in Riyadh depends on your individual treatment plan. A dermatologist first looks at your skin and discusses the concerns you want to address. Based on this assessment, they explain the recommended treatment and its expected cost. This gives you a better idea of the expense before you decide to proceed with Gouri needles.
Which Factors can Change Gouri Needles Cost?
Apart from the basic treatment cost, these factors can change the cost of Gouri needles:
- Number of syringes used: The more syringes required, the higher the session cost.
- Treatment area size: Larger areas generally use more product during treatment. Thus, they cost more.
- Severity of skin laxity: Advanced laxity may require additional product or sessions. This directly impacts the cost.
- Combinational Treatments: When Gouri needles are combined with other treatments such as PRP or fillers, the overall treatment cost increases.
- Promotions and package deals: Available discounts can reduce your overall treatment cost.
- Product authenticity and distributor: Genuine products from approved distributors generally cost more.
Why get Gouri needles at Enfield Royal Clinic?
Gouri treatment needs careful planning, not just the right product. Enfield Royal Clinic does exactly that. It combines medical guidance with personalized care for your skin and goals. Here is why you should get your needles from our clinic:
- Expert Injectors: We have qualified injectors who perform Gouri treatments with careful technique and medical oversight.
- Personalized Treatment Plans: Your treatment plan is adjusted according to your skin condition and individual aesthetic concerns.
- Genuine Gouri Product: Our Gouri treatment uses genuine PCL-based products purchased through appropriate medical channels.
- Comfortable Treatment Experience: Each session includes careful needles, clear guidance, and simple aftercare instructions for you.
- Transparent Pricing: You receive clear information about treatment costs before starting your Gouri sessions.
- Convenient Follow-Ups: Our follow-up care helps monitor your skin response and decide if further treatment is needed.
Give Your Skin a Collagen Boost - Book us Now!
If you’re looking for a way to refresh tired-looking skin, Gouri needles in Riyadh may be worth considering. The treatment supports collagen production to make your skin firmer and look smoother. At Enfield Royal Clinic, our dermatologists examine your skin before creating a suitable treatment approach. They select the injection points carefully, then administer Gouri across the targeted areas. Both your skin condition and comfort remain important during the treatment. Take the first step towards refreshed skin. Book your appointment now via WhatsApp, call, online form, or live chat.
FAQs.
Gouri does not require a fixed number of sessions for every patient. Many people start with one treatment, then consider another one or two after reviewing their progress. Additional sessions are commonly spaced about 4 to 6 weeks apart.
Results from Gouri appear gradually as collagen production increases in the skin. You may see subtle firmness within 1 to 2 weeks, followed by visible changes during the next several weeks. However, the collagen response can become more apparent around 3 months.
The results usually last about 6 to 12 months, though the duration differs between patients. PCL is gradually broken down by the body during this time. However, when the results start to fade, your provider may suggest another maintenance session.
Yes, Gouri can sometimes be used alongside Botox, PRP, or HA fillers. The treatments should still be planned with enough spacing between needles. This helps the skin to settle and allows each treatment response to be addressed properly.
The difference is that Gouri uses liquid PCL without microspheres, while Juvelook contains PDLLA microspheres with non-cross-linked HA. This formulation difference affects how each product is delivered and how it stimulates collagen. Though both are used to support collagen and improve skin quality
Gouri is made with polycaprolactone, or PCL, at a concentration of 21%. It comes as a liquid solution that helps support collagen production in the skin. PCL is biodegradable and has also been used in certain medical products.
No, Gouri is not a conventional dermal filler. It is used as a collagen biostimulator, so its effects develop as the skin produces new collagen. Unlike HA fillers, it does not create immediate, dissolvable volume.
